Camera Mounts & Offsets¶
Playlists: Flair 7 Training Videos, Flair Lite & Nano Tutorials, Cinebot Mini/Max & Flair 7 Training
Related HOW TO: Measuring Lens Nodal Point in the Field, Focus Calibration — 3-Point vs Lookup Table
Related Issue: Probe Lens Camera Mount / Tilting Lens - Tube Length, End Angle, and Offsets
Searchable transcript: Open full transcript
AI Summary
A video covering Camera mounts & offsets in Flair.
For operators using this as a reference, the main focus is move programming and zeroing. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.
The practical setup context is that hardware referenced includes CAMERA_RED. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.
The chapter links below provide 4 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.
Chapters
- 00:18 — instance have a very long probe lens and you wanted to move around the probe
- 01:07 — offset, which again there shouldn't be, that should remain zero, so you don't
- 02:08 — my film plane, so I'm not going to I'm just going to leave that at zero. And
- 03:25 — offset. And my Y is sideways, which is normally zero, but my Z is from that