Explaining the 3D Rig model display in Flair 7¶
Playlists: Flair 7 Training Videos, Cinebot Mini/Max & Flair 7 Training
Related Issue: 3D Rig View Tilts After Pressing Play
Related Issue: 3D Rig View - Camera FOV, Focal Length Display, and Lens Representation
Searchable transcript: Open full transcript
AI Summary
A video explaining the 3D Rig model display in Flair 7 and how to use it.
For operators using this as a reference, the main focus is Phantom workflows, import/export, move programming, robot safety, and track calibration. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.
The practical setup context is that hardware referenced includes CAMERA_PHANTOM and CAMERA_RED, and software/version references include Flair 7, and the working environment is Flair 7. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.
The chapter links below provide 9 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.
Chapters
- 00:15 — have a 3D model of your rig your move and lots of additional information
- 01:06 — Backwards I can pause it carry on okay I can also make it just repeat
- 03:19 — a line all the way through the move of what the camera is doing
- 04:42 — view okay next we can import 3D rig models I have one here
- 05:50 — is so let's say I want to be 2 m to the side of my rail minus 2
- 06:43 — what you can also do is you can also move the model on the screen
- 08:00 — those older members of the public amongst us and then there's a Phantom
- 09:06 — this is what it looks like from the top and this is my move from the
- 09:52 — is what it's going to see as I run that move so you can actually simulate moves