Limits of the rig during Moves & Browsing¶
Playlists: Flair 7 Training Videos, Cinebot Mini/Max & Flair 7 Training
Related HOW TO: Setting Up Axis Acceleration
Related Issue: Track Axis Trips Mid-Move Due to Velocity Spike (Tripcode 3)
Related Issue: Flair.ini and UI Operator Tips - DefaultFrameInc, Browse Speed, Screen Size
Searchable transcript: Open full transcript
AI Summary
A video demonstrating rig limits during moves and handheld controller browsing.
For operators using this as a reference, the main focus is HHB, motion smoothing, move programming, and track calibration. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.
The practical setup context is that hardware referenced includes CAMERA_RED and HHB. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.
The chapter links below provide 8 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.
Chapters
- 00:15 — want to explain the difference between the handheld
- 01:15 — it can become dangerous doing it while moving it manually whereas in a move
- 02:12 — slowly creeping along very slowly just going to speed up a
- 03:01 — move and
- 03:54 — at round about there it turns blue indicating that it's going too fast it's
- 05:04 — positional limits this is my velocity limits and
- 06:12 — something is too fast uh it's important to heat it but
- 07:03 — potentially tip over so generally speaking whenever you run a move you