Unboxing the Cinebot Mini¶
Playlists: Cinebot Mini/Max & Flair 7 Training
Related HOW TO: Cinebot Mini — Unboxing, Assembly & First Startup
Searchable transcript: Open full transcript
AI Summary
A detailed video showing the unboxing of a CineBot Mini and setting it up for first time use. Also some notes on preparing it for transportation.
For operators using this as a reference, the main focus is Network Direct, axis limits, motion smoothing, move programming, and robot safety, while it also touches on synchronization, track calibration, and zeroing. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.
The practical setup context is that hardware referenced includes BLOOP_LIGHT, BOLT, CAMERA_RED, CINEBOT_MINI, PRECISION_TRACK, and TRIGGER_BOX. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.
The chapter links below provide 17 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.
Chapters
- 00:00 — intro & opening crate
- 07:34 — Setting up the pinch wheel
- 08:35 — operating the wheel units
- 12:22 — Racking joiner & limit magnets
- 13:14 — Levelling the short piece of rail
- 14:42 — Adding the long piece of rail & levelling
- 25:52 — Using track bearing to smooth bearing rail (also showing OPTIONAL Spares package)
- 34:50 — Connecting the racking
- 37:19 — Adding Riser to track base & adapter plate
- 40:17 — Adding the arm to the track base
- 42:33 — Attaching umbilical to the track base
- 45:39 — Connecting the umbilical to the Operator control case
- 49:38 — Power On, confirm position, Homing arm
- 55:00 — Connecting arm cable set
- 57:36 — Attaching Camera platform
- 59:31 — Dismantling the system
- 01:02:06 — Preparing the base & rail for transport