Flair Lite - PushMoco & Waypoint Timings¶
Playlists: Flair Lite & Nano Tutorials
Related HOW TO: Using Push Moco to Create a Move
Related HOW TO: Estimate Target
Related HOW TO: Cinebot Mini — Unboxing, Assembly & First Startup
Searchable transcript: Open full transcript
AI Summary
A short video explaining how to use PushMoco on Flair Lite and adjust waypoint timings.
For operators using this as a reference, the main focus is axis limits, motion smoothing, move programming, robot safety, and spline behaviour, while it also touches on track calibration. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.
The practical setup context is that hardware referenced includes CAMERA_RED, CINEBOT_MINI, and PRECISION_TRACK. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.
The chapter links below provide 15 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.
Chapters
- 00:33 — setups. I'm going to do sounds. Okay. And I'm going to select waypoint
- 01:36 — to stop it from moving. But it should be that when you enable it, it doesn't move
- 02:25 — audio is going to recorder not to a set of speakers. So I'm going to now move it
- 03:20 — see what that looks like in preview. So, this is my move.
- 04:11 — beginning. Remember, I'm at the end. So, it's going to do a straight line move to
- 06:50 — Good. And so now when I run it, it's in focus throughout my move. I haven't had
- 07:37 — will try and put a nice smooth curve
- 08:31 — that point. Okay. And if I now run this move
- 09:55 — I'm going to just go to the start of the move
- 12:12 — and the distance that travel is traveled in between affects the move right which
- 13:54 — far away from everything. But let's try and put an extreme move on this. Okay.
- 14:41 — problem running this move. Yeah, it's
- 16:04 — So that's not workable. So I wouldn't be able to do that move.
- 17:16 — >> And now it's >> it's doing a very different move, but it
- 19:31 — >> Okay. All I really do is adjust it. Okay. So, actually move it further away.