Skip to content

Adding a Network Node in Flair

Playlists: Flair 7 Training Videos, Cinebot Mini/Max & Flair 7 Training

Searchable transcript: Open full transcript

YouTube thumbnail for Adding a Network Node in Flair

Title: Adding a Network Node in Flair
Duration: 09:38
Video ID: LWrY0a8IlQ8
Topics: EtherCAT, Network Direct, firmware flashing, hot booting, import/export, move programming, synchronization, track calibration, BOLT, BOLT_JR

AI Summary

Adding a network node in Flair including.

For operators using this as a reference, the main focus is EtherCAT, Network Direct, firmware flashing, hot booting, and import/export, while it also touches on move programming, synchronization, and track calibration. It should help when deciding which Flair workflow, robot behaviour, or setup area is relevant before opening the full video.

The practical setup context is that hardware referenced includes BOLT, BOLT_JR, PRECISION_TRACK, TRIGGER_BOX, and TURNTABLE. This helps connect the video to the rig, accessory, software environment, or workflow label an operator may already be working with.

The chapter links below provide 9 timestamped jumps into the main setup, demonstration, and workflow moments, making it easier to go straight to the section that matches the issue or task being investigated.

Chapters