Skip to content

CS8 Display Shows Blinking Dot Instead of A — Normal Engaged Indicator?

Summary

If a Bolt Jr+ / CS8 runs normally but the 7-segment display shows a blinking dot rather than staying on A, confirm whether the robot is engaged. The community checked the CS8 manual code table and noted there is no ... error code; Gordon Eschke later noted flashing is normal when engaged.

Symptoms

  • On power-up the display progresses through E > r > s > A.
  • After A, the display changes to a blinking dot.
  • Robot motion and Flair connection still function normally.
  • Display may show U when engaged and 8 when E-stop is pressed.

Community Guidance

[LIKELY] Treat the blinking dot as display/engaged state if everything else works

2024-10-30 — Fu ShiShou / Timothy Heys Cerchio / Gordon Eschke

  1. Check the CS8 manual's 7-segment display table.
  2. Confirm whether the display changes to expected states when:
  3. robot is engaged
  4. E-stop is pressed
  5. If robot motion and Flair connection are normal, this may be normal engaged/display behaviour rather than a fault.

Gordon Eschke: flashing would be when it is engaged normally.

confidence_score: 0.7

▶

Media Text / Description

  • Video description: CS8 / Bolt Jr+ seven-segment display changes from normal boot letters to a blinking dot while the robot otherwise runs normally.
  • Media 1: Video description: CS8 / Bolt Jr+ seven-segment display changes from normal boot letters to a blinking dot while the robot otherwise runs normally. Searchable terms: CS8 blinking dot; not showing A; E > r > s > A; display shows U when engaged; display shows 8 when E-stop is pressed. Source file: 00027820-VIDEO-2024-10-30-12-28-46.mp4.

WhatsApp Excerpts

[30/10/2024, 12:28:46 pm] ~ Fu ShiShou: Hello First time asking question here Does anyone know what it means when the light of the Bolt Jr showing “…” It starts to happen recently for few times , not showing A but some how still function normal Just wonder what it means

[30/10/2024, 5:23:59 pm] Timothy Heys Cerchio: And there doesn't seem to be "..."

[30/10/2024, 5:24:50 pm] Timothy Heys Cerchio: For your interest, you can check for yourself here 👇🏼

[30/10/2024, 5:25:33 pm] Timothy Heys Cerchio: cs8c.pdf • 248 pages

[30/10/2024, 5:27:12 pm] Timothy Heys Cerchio: Ah, I see now that what you mean is just the little blinking dot...

[30/10/2024, 5:30:02 pm] Timothy Heys Cerchio: At what point does it start blinking? Do you see any of the other letters?

[30/10/2024, 6:09:58 pm] ~ Fu ShiShou: Hi,Timothy thank you for the reply When the robot switch on Normally it will showing E>r>s>A and stay at A The light blinking starts after the A And instead of A, The blinking light constantly stays there Except the light inside is not showing A , motion of the robot and flair connection etc everything function seems normal.

[30/10/2024, 6:20:25 pm] Timothy Heys Cerchio: Strange... But good to know tgst it is still working. Does it switch to U when the Robot is Engaged and/or 8 when the E-Stop is pressed?

Official Documentation

Flair Classic Manual — Ch.14A High Speed Robots / EtherCAT — p.235

Flair 7 Manual — Ch.11 High Speed Robots — p.195