VP Box NoSync Mode Outputs 50 Hz¶

CONFIRMED SYNC FLAIR 7

Summary¶

If the Flair VP Box is set to NoSync, it does not follow the Flair project frame rate. A user checked the quick start guide and reported that the VP Box outputs 50 Hz in NoSync mode.

Symptoms¶

The Flair VP Box is in NoSync mode and you want to know what frame rate it outputs — specifically whether it follows the Flair project rate (e.g. 24 fps) or defaults to something else.
The VP Box is sending 50 Hz to connected LED walls or engine when you expected it to follow the project's 24 fps setting.
You are troubleshooting why the VP sync output does not match the Flair move frame rate when NoSync is selected.

Stable ID¶

ISSUE-SYNC-010

First Reported¶

2026-05-13 - Josh T asked whether NoSync follows a 24 fps Flair project or defaults to 50 MHz/Hz.

Community Solution¶

[CONFIRMED] 2026-05-13 - User: Josh T¶

The answer was found in the QSG: VP Box goes to 50 Hz in NoSync.

confidence_score: 0.72

WhatsApp Excerpts¶

2026-05-13 03:24 - Josh T asked whether a VP Box set to NoSync follows the Flair project frame rate, for example 24 fps, or defaults to 50 Hz/MHz. He also clarified he was not using genlock.
2026-05-13 03:57 - Josh T reported that he found the answer in the QSG: the VP Box goes to 50 Hz in NoSync mode.